For manufacturers
Parts for your own charger.
Type 2 panel sockets and open-ended Type 2 cables.
EV Charger ComponentsBEV-3016-4320-1A
Panel Socket New Type (Without Lock Motor) Single-phase 3.7-7.4 kW · 4-Point Assembly
This version: Monophase · 3,7 - 7,4 kW · one of 2 versions
The New Type panel socket is an alternative model developed for narrow enclosures where the standard panel socket does not fit. Its electrical specifications match the standard model; only the housing form differs. Economical Type 2 panel socket without lock motor. For manufacturer installations that do not require manual locking or whose locking mechanism is supplied separately.
Price
€25Excl. Tax
Single-phase 3.7 - 7.4 kW, for in-panel integration
Compatible with manual or external locking mechanisms
4-point mounting - quick installation
Compliant with IEC 62196-2 Type 2
In detail
Panel Socket New Type (Without Lock Motor) up close
Frequently Asked Questions
What does the Charger Equipment category include?
It includes the professional equipment used in charging station installations: AC and DC charging sockets (Type 2, CCS2), tethered and socketed versions, socket covers, locking mechanisms, optional communication modules and spare parts that can be integrated into a charger. It is used by OEM manufacturers and service providers.
What is the difference between a DC charging socket and an AC charging socket?
AC sockets (Type 2) carry alternating current up to a maximum of 22 kW and have a simple construction. DC sockets (CCS2) carry 50-350 kW of direct current and have thicker power conductors plus temperature sensor connections that monitor the power contacts (Pt1000 on Bemis CCS2 cables). DC sockets are 3-4 times heavier and require special installation.
What does an operator need to set up a charging station?
A transformer connection or sufficient subscribed power, chargers supporting OCPP 1.6J/2.0.1, CPO software for billing and management, and an EPDK licence or a dealer agreement are required. Our Bemis B2B team supports product selection and hardware supply; installation and commissioning are the buyer's responsibility and are carried out in line with the Bemis Installation Procedures.
What is a CCS2 socket?
Combined Charging System 2 (CCS2) is the DC fast-charging standard of the European market. It is a combined design that adds two extra DC pins below the Type 2 AC connector, so both AC and DC charging can be done through the same vehicle socket. It supports power between 50 and 350 kW.
Can a spare socket or cable be replaced?
Yes. The cables and sockets of our Bemis chargers are modular in design; in the event of wear or damage, our authorised service can replace them quickly. Open-ended CCS2 DC charging cables are also available as spare parts in 80, 150, 250 and 400 A ratings and 5 and 8 metre lengths.
Related Products
